With the increasing importance of renewable energy, wind power generation, as an important part of clean energy, has been widely concerned and applied. In the wind turbine, the rotor shaft hole is an important component, and the choice of the sealing glue is directly related to the stable operation and service life of the wind turbine. So, what glue should be used to seal the wind power rotor shaft hole?

 Select the sealing glue suitable for the shaft hole of the wind turbine rotorENIENT EG0552ABfatal. In this regard, there are many different types of glue available on the market, but to achieve well in the harsh wind power environment, the following key factors are considered:

The first is weather tolerance. Because wind turbines are usually installed outdoors and in high altitude environments, their parts need to have high weather resistance and can withstand the erosion of natural environmental factors such as high temperature, low temperature and ultraviolet light. Therefore, it is particularly important to choose the sealing glue with strong weather resistance and not easy to aging.

 Next is the bond strength. The load and vibration of the wind turbine during the operation are large, so the sealing glue of the rotor shaft hole needs to have a good bonding strength, which can ensure that the parts will not fall off or become loose when rotating at a high speed.

 In addition, chemical resistance is also a factor to be considered. In the operation process of the wind turbine, the parts may be eroded by oil pollution, chemicals, etc., so the sealing glue needs to have a certain chemical resistance, to ensure that it will not lose the bonding force or cause damage to the parts.

 In view of the above key factors, many sealing glue on the market is difficult to take into account these performance requirements at the same time. However, the modified rubber sealing glue can meet the sealing requirements of the wind turbine rotor shaft hole. The product has excellent weather resistance, after strict testing, to ensure that it can be long-term stable use in the temperature range of-40℃ to 150℃, and not easy to aging, cracking. At the same time, its bonding strength is also very significant, and the bonding effect can still be kept good in the high-speed operation environment of the wind turbine. In addition, the product also has excellent chemical resistance performance, can resist the common oil pollution, chemical erosion, to ensure the long-term stable operation of parts.

 Because of this unique performance, this kind of sealing glue has been widely used in the wind power industry. Many well-known wind turbine manufacturers use it as the preferred product for the sealing of wind power rotor shaft hole. In practical use, the product can not only ensure the stable operation of wind turbines, extend the service life of components, but also greatly reduce the maintenance cost and reduce the failure rate, thus making a positive contribution to the sustainable development of the wind power industry.

 In conclusion, the selection of sealing glue in the wind power rotor shaft hole is very important. Among many choices, modified rubber filling glue has become the first choice of wind power industry with its excellent weather resistance, bonding strength and chemical resistance. In the future, with the continuous development and growth of the wind power industry, I believe that the modified rubber sealing glue will continue to shine and heat in this field, and contribute more strength to the cause of clean energy.