The vehicle pressure sensor plays an important role in the engine, which can monitor the oil pressure of the vehicle engine and transmit the data to the electronic control unit of the vehicle to ensure the normal operation of the engine. In order to ensure the stable and reliable operation of the sensor, the sealing glue is generally used to secure the sensitive parts of the sensor together and prevent the external liquid (such as oil) from entering.

 However, sometimes problems can occur after a long period of use, such as the infiltration of engine oil. If the automotive pressure sensor filling glue is soaked by the oil, it is likely to lead to degumming in a certain period of time. For this case, we recommend the use of ultra-oil resistant modified epoxy adhesive as the sealing material to solve this problem.

 ENIENT Super oil-resistant modified epoxy adhesive EG0512AB is a high-performance adhesive specially designed specifically for automotive pressure sensors, which has excellent oil resistance. Compared with the ordinary epoxy adhesive, the super oil-resistant modified epoxy adhesive can maintain the stability and adhesion force for a longer time under the oil immersion. This is due to the addition of a special modified agent in the super oil resistance modified epoxy adhesive, so that it has excellent oil resistance performance.
 After the use of ultra-oil-resistant modified epoxy adhesive, the adhesion between the sensor and the adhesive can remain stable and reliable even if the oil is soaked for a long time. This adhesive can resist the influence of the chemical composition and temperature in the oil without degumming. Therefore, the use of super oil-resistant modified epoxy adhesive as the sealing material can effectively solve the problem of the automobile pressure sensor soaked by oil.
 
 Surprisingly, this modified epoxy sealing adhesive is soft and flexible, so there is no general epoxy adhesive brittle, not falling, vibration resistance and other problems; and maintain the high adhesion, high strength, high temperature resistance, high oil resistance and other characteristics.

 To sum up, after the automotive pressure sensor is used for a long time, if the sealing glue is soaked by oil and leads to degbonding, the super oil resistant and flexible modified epoxy adhesive can be considered as an alternative material to ensure the stability and reliability of the sensor in the oil environment.

In conclusion, the use of ultra-oil-resistant modified epoxy adhesive to seal the automotive pressure sensor can improve the service life and reliability of the sensor, and reduce the failure and damage caused by oil immersion. This can not only ensure the normal operation of the car engine, but also can extend the service life of the sensor, improve the performance and reliability of the vehicle.