EP90 METAL PRIMER is an Alkyd based shop primer. It is designed as an interim holding primer and is not intended for use on long term exposed steel. It has been formulated as a budget product for use on steel surfaces in general engineering shops, or for theconstruction industry. It is a relatively quick dry product which can easily be applied by conventional methods. Can be overcoated with EP30.
Steel should be free from mill scale, rust and grease before painting. Sand blasting
or chemical etching is preferred. If this is not possible flame cleaning or extensive
wire brushing is necessary.
Colour/Texture :Red Oxide. or Grey Green Matt texture.
Volume Solids :52%.
Product Density :1.34kg/litre.
Drying Time :Tack Free - 10 minutes.
Recoat Time :2-3 hours.
Flashpoint :17°C.
