Brief introduction of anti-fingerprint coating:
 With the continuous appearance innovation and technological innovation of traditional materials, as well as the increasing higher quality requirements, the use of technological coatings has increased sharply to meet their performance requirements in a large number of related modern applications. Choosing the ideal coating type and application method for your panel & material surfaces is critical.
 
 ENIENT® Since 2015, it has no longer used any chlorine-containing solvents, CFC solvents, and has developed an environmentally friendly solvent to replace the excellent performance of chlorine-containing solvents, which has been widely used in the electronic and industrial markets.
 
ENIENT® Anti-fingerprint & protective coating products cover modified resin and perfluorine series products, and there are two curing methods of baking and self-drying, spraying, immersion coating, rolling coating, coating and other application methods. The modified resin is characterized by high hardness and low cost; the perfluorinated series can provide smooth texture and excellent chemical corrosion resistance; the protective coating, the highly adhesion coating, the durability of the material, and the innovation of color, texture and feel. ENIENT Numerous product systems can meet most of the anti-fouling and antibacterial protection requirements in the industry, and at the same time can provide customers with flexible selection in viscosity, hardness, curing time, temperature resistance, acid and alkali resistance, electrical performance and other aspects, to meet the personalized requirements of customers.
 

Bake-type modified resin	Self-dried type of modified resin	Bake-type fluorocarbon series	Self-dried perfluoro series
· Strong adhesion	· Strong adhesion	· Strong adhesion	· High adhesion
· Water washing resistant and solvent resistant agent	· Water washing resistance and alcohol resistance	· Water washing resistant and solvent resistant agent	· Water washing resistant and solvent resistant agent
· Can be polished and repaired	· Spray repair	· Hydrophobic oil	· odorlessness
· Fold bending	· Easy maintenance	· non cohesive gel	· High color preservation

 
The series anti-fingerprint coating ENIENT®E GL2203 can form a layer of dense and stable ultra-thin coating on the metal surface, with excellent anti-antibacterial anti-aging, super wear resistance.
 ENIENT®E GL2203 Zhenhe series anti-fingerprint coating
· For high quality protection of metal parts.
 
ENIENT®E GL2203 Parameter analysis:

Description of unit packaging 4L/10L surface Non-ferrous liquid The smell of base Solvent flavor Plastic safety A small area test is required Metal safety Safety of metals dilution ratio No dilution service condition Bake at 180°C for 40min Water resistant yes Alcohol resistant yes

 
Anti-fingerprint coating series selection:
Diamond crystal series
Zhen lotus series
Aurora series
ZhenRui series
 
 
 Notes for anti-fingerprint coating:
· Please use it according to the product instructions.
· Be well ventilated for large-scale operations
· Maintain ventilation on the operation site, and wear filter equipment in a confined space.
· Try to avoid touching the skin eyes during the operation. If accidentally splashed into the eyes, immediately rinse with a lot of water.
· When unused, please store in a 25℃ shade.
· Abandoned empty tanks should not be burned in the fire.
· Waste containers and products shall be treated according to local regulations.
 
 Operating conditions and protection requirements of anti-fingerprint coating:
Follow the Safety Operation Manual, and the operation manual prepared by the company. Take full-body protective measures, and wear good protective clothing and protective masks.
 
 Requirements for accidental prevention and control during the fingerprint-proof coating operation:
When using the fingerprint coating, follow the properly designed and tested procedures. Please take appropriate shelter measures for the leakage material. Do not dump the liquid directly into the underground water channel.
 
 Special considerations:
1. If there is oil on the surface or dirt, please pre-clean.
2. The product is only sprayed and is not suitable for rolling coating or soaking coating. When spraying, pay attention to protection and ventilation, static gun should choose the standard static gun in line with safety regulations, away from electric spark, open fire, dangerous!
3. This product has a variety of matte to bright products to choose from, due to the difference in the proportion of additives, long-term static storage may lead to precipitation, the whole bucket needs to be shaken for 3~5 minutes before use, the liquid should be shaken.
4. Spraying skills: the atomization spray gun with delicate liquid is used, the spraying distance is kept at 10~15cm, the four-side spraying method is adopted until the surface is moistened, and the finished product is delicate and smooth after curing.
For how to use and more explanations, please visit our website.