Coatings and paintsPruduct Catalog
Search / EP /

ENIENT® Drill crystal series anti-fingerprint coating EGL1205-baking type salt s

Brief introduction of anti-fingerprint coating:
 With the continuous appearance innovation and technological innovation of traditional materials, as well as the increasing higher quality requirements, the use of technological coatings has increased sharply to meet their performance requirements in a large number of related modern applications. Choosing the ideal coating type and application method for your panel & material surfaces is critical.
 
 ENIENT® Since 2015, it has no longer used any chlorine-containing solvents, CFC solvents, and has developed an environmentally friendly solvent to replace the excellent performance of chlorine-containing solvents, which has been widely used in the electronic and industrial markets.
 
ENIENT® Anti-fingerprint & protective coating products cover modified resin and perfluorine series products, and there are two curing methods of baking and self-drying, spraying, immersion coating, rolling coating, daub and other application methods. The modified resin is characterized by high hardness and low cost; the perfluorinated series can provide smooth texture and excellent chemical corrosion resistance; the protective coating, the highly adhesive coating, the durability of the material, and the innovation of color, texture and feel. ENIENT Numerous product systems can meet most of the anti-fouling and antibacterial protection requirements in the industry, and at the same time can provide customers with flexible selection in viscosity, hardness, curing time, temperature resistance, acid and alkali resistance, electrical performance and other aspects, to meet the personalized requirements of customers.
 
Bake-type modified resin Self-dried type of modified resin Bake-type fluorocarbon series Self-dried perfluoro series
· Strong adhesion · Strong adhesion · Strong adhesion · High adhesion
· Water washing resistant and solvent resistant agent · Water washing resistance and alcohol resistance · Water washing resistant and solvent resistant agent · Water washing resistant and solvent resistant agent
· Can be polished and repaired · Spray repair · Hydrophobic oil · odorlessness
· Fold bending · Easy maintenance · non cohesive gel · High color preservation
 
Drilling crystal series anti-fingerprint coating ENIENT®E GL1205 can form a layer of dense and stable invisible coating on the metal surface, with excellent antifouling and anti-aging, salt spray protection, super wear resistance.
 ENIENT®E GL1205 Drilling crystal series anti-fingerprint coating
· For high quality protection of metal parts, long-term salt spray resistance protection.
 
ENIENT®E GL1205 Parameter analysis:
Description of unit packaging 4L/10L
surface transparency liquid
The smell of base Solvent flavor
Plastic safety A small area test is required
Metal safety Safety of metals
dilution ratio No dilution
service condition Bake at 120°C for 60min
Water resistant yes
Alcohol resistant yes
 
Anti-fingerprint coating series selection:
Diamond crystal series
Zhen lotus series
Aurora series
ZhenRui series
 
 
 Notes for anti-fingerprint coating:
· Please use it according to the product instructions.
· Be well ventilated for large-scale operations
· Maintain ventilation on the operation site, and wear filter equipment in a confined space.
· Try to avoid touching the skin eyes during the operation. If accidentally splashed into the eyes, immediately rinse with a lot of water.
· When unused, please store in a 25℃ shade.
· Abandoned empty tanks should not be burned in the fire.
· Waste containers and products shall be treated according to local regulations.
 
 Operating conditions and protection requirements of anti-fingerprint coating:
Follow the Safety Operation Manual, and the operation manual prepared by the company. Take full-body protective measures, and wear good protective clothing and protective masks.
 
 Requirements for accidental prevention and control during the fingerprint-proof coating operation:
When using the fingerprint coating, follow the properly designed and tested procedures. Please take appropriate shelter measures for the leakage material. Do not dump the liquid directly into the underground water channel.
 
 Special considerations:
1. If there is oil on the surface or dirt, please pre-clean.
2. The product is only sprayed and is not suitable for rolling or soaking. When spraying, pay attention to protection and ventilation, static gun should choose the standard static gun in line with safety regulations, away from electric spark, open fire, dangerous!
3. This product has a variety of matte to bright products to choose from, due to the difference in the proportion of additives, long-term static storage may lead to precipitation, the whole bucket needs to be shaken for 3~5 minutes before use, the liquid should be shaken.
4. Spraying skills: the atomization spray gun with delicate liquid, the spraying distance is kept at 10~15cm, the four side spraying method is adopted until the wet surface is moistened, and the solidified finished product is fine and smooth.
For how to use and more explanations, please visit our website。