APPLICATION
Suitable for bonding, fixing, sealing of high power electronic module and heat dissipation
equipment.
· Suitable for fixing and bonding of hot parts in electronic and electrical modules.
· Well subsititute for thermal silicone grease, simplify the operation.
PERFORMANCE
· Superior performance: Well bond with metal, plastic and other materials.
· Multipurpose: It is used for bonding, fixing, sealing, thermal conductivity, moisture-proof,
waterproof and insulation of electronic products.
· Safety and environmental protection: In the provision of efficient performance, are harmless
to the human body and environment.
· Strong weatherability: It has stable performance under temperature range of﹣50℃~200℃. It
has strong heat and cold resistant.
· Easy to use: It is not drawing, white paste, is easy to operate.
PEOPERTIES
| Appearance |
Paste |
| Viscosity |
- |
| Odor |
Slight odor |
| Colour |
White |
| Tack-free time (25℃.1mm) |
10min |
| Relative density (g/cm3) |
2.50~3.00 |
| Hardness (shore A) |
60~70 |
| Tensile strength (MPa) |
≥2.0 |
| Shear strength (MPa) |
≥2.0 |
| Elongation (%) |
120 |
| Volume resistivity (Ω·cm) |
1.0×1014 |
Dielectric strength
(KV/mm) |
15 |
| Thermal conductivity (w / m · k) |
2.0±0.05 |
| Work temperature |
-50~200℃ |
INSTRUCTIONS
· Clean the bonding surface, remove grease, dust and other dirt.
· Uniform sizing, let surface completely fit with the adhesive, room temperature curing,
recommended leave for 24 hours.
ATTENTION
· Operation area should be well-ventilated. Wear respirator mask in confined space.
· Clean surface clearly before use. Keep the workplace dry.
· Avoid contact with skin and eyes during operation. Flush with plenty of warm water or normal
saline if accidentally splashed into the eye.
· Product should be stored in cool, dry, well ventilated place.
· Do not burn the abandoned empty cans.
· All disposal activities must comply with state, provincial and local regulations.
Disclaimer of Warranties: This information is accurate according to the test of ENIENT. However, due to different environment and conditions of actual use of the product, the result is inevitably different. All products should be tested for suitability on a particular application prior to actual use. ENIENT CHEM CO.,LTD makes no express or implies representations or warranties of description, data and information of reports/specifications of related products.
