- Adhesives and sealantsPruduct Catalog
- Search /
EJ /
ENIENT EG1026 HDPE ACRYLIC STRUCTURE ADHESIVE
ENIENT EG1026 adhesive sealant is widely used, suitable for the solid bonding of a variety of materials without bottom coating, and has the characteristics of high shear strength, high stripping strength, no solvent, and the mixing ratio of 1:1.
PACKAGING
50ML/PIESE
APPLICATION
· Suitable for Bonding, fixing, sealing, sealing, moisture-proof and waterproof, electrical insulation, etc.
PERFORMANCE
· Strong bonding: specialized for the mutual bonding of polyolefin (PP, PE, LDPE, HDPE, etc.), and low surface energy substrate (PTFE, PMMA, nylon, TPO, PU, etc.), and the bonding of low surface energy materials to other common materials such as plastics, metal, composite materials, rubber and other common materials.
· Fast curing: The initial curing speed is fast, without long-time fixation, which is conducive to improving work efficiency.
· Special formula: Especially suitable for difficult sticky plastic products, without surface treatment.
· Safety and environmental protection: soft and low smell, no corrosion of the substrate, environmental protection and reliable.
Tensile shear strength [galvanized steel] 2,000 psi [using MP 90]
Tensile shear strength [Aluminum] 2,500 psi [using MP 90]
Tensile shear strength [GBS] 2,250 psi
Tensile shear strength [Stainless steel] 2,800 psi [using MP 90]
Gap filling capacity.25 in.
Impact resistance performance 22ft.lb./in.[2]
Shaw Hardness of 62 Shore D
Solid content is 100%
The specific volume is 28.55 in [3] / lb.
The fracture elongation rate was 100 – 125%
T-stripping at 42pli
Cream-white in color
The clip time is 910 minutes.@75°F
Flash Point 51°F
Full curing time is 24 hours
Functional curing time is 3 / 4-1 hour
Volume mixing ratio is 10:1
Weight mixing ratio is 89:10
Post-mixing density was 8.77lbs / gal / 1.05gm / cc
After mixing, the viscosity was 15,000 – 17,000 cps
Use the temperature-40°F to 250°F
Viscosity main agent: 12,000 cps; curing agent: 13,000cps
Weight main agent: 8.0 / lbs./gal.; Curing agent: 8.95lbs./gal.
Operation time: 3-5 min.@75°F
PEOPERTIES
| Appearance |
A:paste |
| |
B:thick liquid |
| Viscosity(mPa.s) |
A:- |
| |
B:13000 |
| Odor |
Slight odor |
| Colour |
Translucent |
| Operable time |
6min |
| Tack-free time (25℃.1mm) |
15min |
| Curing time (25℃.1mm) |
24h |
| Shelf life (months) |
9 |
ENIENT EG1026 TRANSPARENT ADHESIVE SEALANT
Disclaimer of Warranties: This information is accurate according to the test of ENIENT. However, due to different environment and conditions of actual use of the product, the result is inevitably different. All products should be tested for suitability on a particular application prior to actual use. ENIENT CHEM CO.,LTD makes no express or implies representations or warranties of description, data and information of reports/specifications of related products.
