Adhesives and sealantsPruduct Catalog
Search / EJ /

ENIENT EG0514 CLEAR ADHESIVE SEALANT

ENIENT EG0514 CLEAR ADHESIVE SEALANT CLEAR is one-component medium viscosity room temperature cured silicone sealant. This product has good adhesion to many kinds of materials such as aluminum, copper, stainless steel and PC and ABS. It has excellent dielectric properties and good heat resistance, the general use temperature range is -60°C ~200°C. It has no solvent, low paint flavor, is safety and environmental protection, has excellent performance and high cost performance.


PACKAGING/YIELD

100G
310ml
250KG.

Performance of Cured Materials



APPLICATION
· Suitable for Bonding, fixing, sealing, sealing, moisture-proof and waterproof, electrical insulation, etc.



PERFORMANCE
· Performance: After curing, the gel is tough and wear-resistant with moderate hardness.
· Curing type: It can be cured at room temperature or accelerated by heating after solvent volatilization.
· Adhesive type: Single component, no solvent.
· Strong weather resistance: stable performance under conditions of -60℃~200℃.


PEOPERTIES
Appearance Semifluid
Viscosity 28000~36000
Odor Slight odor
Colour Translucence
Tack-free time (25℃.1mm) 30min
Relative density (g/cm3) 0.98~1.05
Hardness (shore A) 25~35
Tensile strength (MPa) 1
Shear strength (MPa) 1
Elongation (%) 150
Volume resistivity (Ω·cm) 1.0×1013
Dielectric strength
(KV/mm)
15
Dielectric constant 2.5~2.9
Work temperature -60~200℃
Upper explosive limit%(V/V) No date
Lower explosive limit%(V/V) No date


ENIENT EG0514 CLEAR ADHESIVE SEALANT

Disclaimer of Warranties: This information is accurate according to the test of ENIENT. However, due to different environment and conditions of actual use of the product, the result is inevitably different. All products should be tested for suitability on a particular application prior to actual use. ENIENT CHEM CO.,LTD makes no express or implies representations or warranties of description, data and information of reports/specifications of related products.